We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 distinct branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Introduction:
DeShi rubber slurry pump, the moist parts are created of anti-abrasive or anti-corrosive natural rubber, which
can be completely interchangeable with the metal components. Consumers can decide on different content parts in accordance
to the slurry liquid problems, this kind of as R08, R26, R33, R55, S31, S42, S45, etc. Rubber lined slurry pumps
are a lot more appropriate in delivering high corrosive or abrasive slurries of tiny particle dimension without difficult
or sharp edges.
Slurry Pump Parameters
| Product | Max Electrical power (Kw) |
Inlet & Outlet dimension (inch) | Material for Dress in Elements | Circulation Rate (Q) | Head (H) meter |
Speed (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | 15 | one.5/one | M | 12.6~28.8 | three.5~eight | six~sixty eight | 1200~3800 | 152 |
| R | 10.8~twenty five.2 | 3~seven | seven~52 | 1400~3400 | 152 | |||
| 40HS-B | 15 | two/1.5 | M | 32.4~seventy two | 9~twenty | 6~fifty eight | 1200~3200 | 184 |
| R | 25.2~fifty four | 7~15 | 5.5~41 | 1000~2600 | 178 | |||
| 50HS-C | 30 | 3/2 | M | 39.6~86.four | eleven~24 | twelve~64 | 1300~2700 | 214 |
| R | 36~75.six | ten~21 | thirteen~forty six | 1300~2300 | 213 | |||
| 75HS-C | 30 | 4/3 | M | 86.4~198 | 24~55 | nine~52 | one thousand~2200 | 245 |
| R | 79.2~180 | 22~50 | five~34.five | 800~1800 | 245 | |||
| 100HS-D | 60 | six/4 | M | 162~360 | forty~one hundred | twelve~56 | 800~1550 | 365 |
| R | one hundred forty four~324 | forty~ninety | 12~forty five | 800~1350 | 365 | |||
| 150HS-E | 120 | 8/six | M | 360~828 | a hundred~230 | 10~sixty one | five hundred~1140 | 510 |
| R | 324~720 | 90~200 | seven~forty nine | 400~a thousand | 510 | |||
| 200MS-E | one hundred twenty | ten/8 | M | 666~1440 | 185~400 | 14~60 | 600~1100 | 549 |
| 200HS-ST | 560 | ten/eight | M | 612~1368 | a hundred and seventy~380 | 11~sixty one | 400~850 | 686 |
| R | 540~1188 | one hundred fifty~330 | twelve~50 | 400~750 | 686 | |||
| 250HS-ST | 560 | twelve/10 | M | 936~1980 | 260~550 | seven~68 | three hundred~800 | 762 |
| R | 720~1620 | two hundred~450 | 7~45 | three hundred~650 | 762 | |||
| 300HS-TU | 560 | 14/12 | M | 1260~2772 | 350~770 | 13~sixty three | three hundred~600 | 965 |
| R | 1152~2520 | 320~seven-hundred | thirteen~forty four | 300~500 | 965 | |||
| 350HS-TU | 1200 | sixteen/fourteen | M | 1368~3060 | 380~850 | 11~63 | 250~550 | 1067 |
| 450HS-TU | 1200 | twenty/18 | M | 2520~5400 | seven hundred~1500 | 13~fifty seven | two hundred~400 | 1370 |
| 25HHS-C | thirty | 1.5/1 | M | sixteen.2~34.two | four.5~9.five | twenty five~ninety two | 1400~2200 | 330 |
| 50HHS-D | sixty | 3/2 | M | sixty eight.4~136.eight | 19~38 | twenty five~87 | 850~1400 | 457 |
| 75HHS-E | 120 | 4/three | M | 126~252 | 35~70 | twelve~97 | 600~1400 | 508 |
| 100HHS-E | 120 | 6/4 | M | 324~720 | 90~two hundred | 30~118 | 600~one thousand | 711 |
| 150HHS-S | 560 | 8/six | M | 468-1008 | a hundred thirty~280 | twenty~94 | five hundred~1000 | 711 |
For the material of wearing parts,
“M” = metallic, ultra chromium alloy
“R” = anti-abrasive rubber
Comprehensive Features:
one. EPT designed for interchangeable wet areas with metal lined slurry pump.
2. Casing – Casing halves of ca EPT or ductile iron with exterior reinforcing ribs include the dress in liners and offer
high operating stress capabilities
3. Bearing assembly – A massive diameter shaft with limited overhang minimizes deflection and contributes to long
bearing daily life. Only 4 by way of bolts are necessary to hold the cartridge sort housing in the body.
4. Pump body – A rigid, a single-piece casting cradles the “cartridge” shaft and bearing assembly. A small
amount of by means of bolts hold the pump casing to the frame. An simple means of exterior impeller adjustment
is presented in a handy position under the bearing housing.
five. Impeller – EPT and rear shrouds have pump-out vanes. This design and style decreases recirculation and seal
contamination, Elastomer impellers are produced from rubber coated high tensile metal, Forged-in impeller threads
need no impeller insert or nuts.
6. Liners – Rubber elastomer liners are interchangeable with hard metal. The elastomer liners are bolted,
not bonded, to the outer casing. Elastomer seal rings back all liner joints.
7. Shaft seal – Packing seal,Centrifugal seal, and Mechanical seal.
8. Driving type – Adaptable coupling,V-belt with pulleys,Gearbox,VFD,S EPT management and so forth.
nine. The discharge department can be oriented to any eight positions at the interval of forty five degrees
10. Simple to set up and sustain in on-website software.
Contact
Welcome to contact us any time for specifics.
Your inquiry will get our prompt consideration and reaction !
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 distinct branches. For far more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of unique equipment manufacturer’s (OEM) component quantities or emblems , e.g. CASE® and John Deere® are for reference needs only and for indicating merchandise use and compatibility. Our business and the detailed alternative components contained herein are not sponsored, accepted, or made by the OEM.
